Archive for the ‘giant base’ Tag

Building a Giant Based Trident   10 comments

In the previous repotting post I started a giant based trident maple tree that will be grown on a tile with five holes. This method is suggested in Gary Woods blog and I have found his method to be very good for what it is I want to do. This is what I have done. I have no idea if it is close to what he did, but at least it is ready for the season and I will find out soon enough if it going to be successful.

I’ll start by reposting the pictures again of the work done on the tridents for the project.

DSC_00010001

DSC_00020002

DSC_00030003

DSC_00120001

DSC_00130002

The trees have been removed from the pots and the roots cut back. The trees sit and soak in a bucket of water with B-1 in it and this way each tree will not dry out while I prepare all five trees.

DSC_00250001

I am going to use the 18 x 6 inch colander for this project. This hold about two thirds of a cubic foot of soil.

DSC_00260002

For all of you out there wondering what happened to the Growstone, here it is. This project will be grown out in 100 percent Growstone. This is a synthetic recycled glass product very similer to pumice. I like the size and the irregular shape. I feel that with the colanders increased air and the increased airflow in the medium, I should get super hard growth all year. Couple that with hard fertilizing and plenty of water and I should hope to see some layering taking place by fall.

DSC_00270003

The whole thing planted out in the growstone. The tree in the middle had the most interesting shape, the lowest buds to cut back to after it fuses and the largest trunk. This will be the tree I keep after all is done down below. It is important to keep a low bud for the middle tree since I will probably need to chop this at some point due to the rank growth it will do thru the year.

DSC_00280004

I covered the entire surface with long fibered moss since the product is light and I don’t want to displace it while watering. This is the moss dry.

DSC_00290005

And this is the surface after watering. Now all I have to do is wait and see how it grows.

DSC_00300006

I recieved a comment about what I am trying to accomplish here with a photo or drawing. This is a simple drawing showing the process over a few years. The trees will continue to grow and spread over the plate and then will grow onto one another to fuse at the base. As the base increases in size, the four outer trunks will be chopped away leaving the large base to heal and grow even larger.

trident base

%d bloggers like this: